22
Check the insulation of the motor and the motor
cable.
Connect the power cables.
Connect the control and the auxiliary control cables.
Check the installation.
Commission the drive.
Commission the optional brake chopper (if present).
Product and service inquiries
Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to
selecting Sales, Support and Service network.
Product training
For information on ABB product training, navigate to
Training courses.
Providing feedback on ABB Drives manuals
Your comments on our manuals are welcome. Go to
Document Library – Manuals feedback form (LV AC drives).
About this manual
Task
See
Electrical
installation:
Checking the insulation of
the assembly
Electrical installation
Electrical
installation,
Motor control and I/O
board
(RMIO), and the optional module manual
delivered with the module.
Installation checklist
Appropriate firmware manual
Resistor braking
www.abb.com/drives
www.abb.com/drives
www.abb.com/drives
and
and select
and select