JVC LT-Z26SX5 Service Manual page 12

3.1.9 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 7 screws [A], then remove the SPEAKER
BOX.
(2) Remove the 4 screws [B], then remove the SPEAKER (L /R).
(3) Remove the 8 screws [C], then remove the DUCT(L/R).
NOTE:
Since the speaker is attached in a certain direction, attach the
speaker in the same correct direction as it has been attached.
3.1.10 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
(1) Remove the 2 screws [D], then remove the MAIN BASE.
(2) Remove the 5 screws [E]. then remove the LCD PANEL
UNIT with the TOP FRAME and BOTTOM FRAME.
(3) Remove the 4 screws [F]. then remove the TOP FRAME
and BOTTOM FRAME from the LCD PANEL UNIT.
1-12 (No.YA327)
3.1.11 REMOVING THE FRONT LED PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
(1) Remove the 2 screws [G], then remove the FRONT LED
PWB.
3.1.12 REMOVING THE LED LENS (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
(1) Remove the 2 screws [H], then remove the LED LENS.