Related Manuals for JVC LT-Z26S2/A
Summary of Contents for JVC LT-Z26S2/A
- Page 1 ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO PORTUGUÊS LT-Z26S2 WIDE LCD PANEL TV INSTRUCTIONS LCT1488-002A-H...
- Page 3 Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
- Page 4 Point defects LCDs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time. Distance recommendations Avoid improper installation and never position the unit where good ventilation is impossible.
-
Page 5: Table Of Contents
Return to TV channel instantly......13 Using the FREEZE function ......13 Using the PIP function ........13 Using the MULTI-PICTURE function ....14 Operating a JVC brand VCR or DVD player ..14 Teletext function........15 Basic operation ..........15 Using the List Mode .........15 Hold..............15 Sub-page ............16... -
Page 6: Setting Up Your Tv
Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Ensure that the TV is installed on the wall by a skilled installer. -
Page 7: Putting The Batteries Into The Remote Control
Setting up your TV Putting the batteries into the Remote control Use two AA/R6 dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. • Follow the warnings printed on the batteries. •... -
Page 8: Connecting The Aerial And Vcr
Setting up your TV Connecting the aerial and VCR Connecting the power cord to the AC outlet • Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. Insert the AC plug on the power cord from the TV into AC •... -
Page 9: Initial Settings
Greek, Swedish, Finnish 2 Press the # # button on the remote control GROUP-2 Polish, Serbian, Croatian, Slovenian, The TV turns on from standby mode and the JVC logo is Czech, Slovak, Rumanian, Hungarian, displayed. German, French, Italian, Swedish, Finnish •... - Page 10 Initial settings 6 Press the blue button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR). • To cancel the AUTO PROGRAM function: Press the b button. AUTO PROGRAM EDIT CH / CC...
-
Page 11: Tv Buttons And Functions
TV buttons and functions Turn the TV on from standby mode Press the A A A A button or P p p buttons to turn the TV on from standby mode When the TV is turned on, the power lamp dims slightly. •... -
Page 12: Remote Control Buttons And Functions
Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information button 4 c button 5 3 sound button 6 b button 7 5 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = Standby button ~ VCR/TV/DVD switch ! R button... -
Page 13: Adjust The Volume
Remote control buttons and functions Use the PR LIST: Watch images from external devices 1 Press the h h (Information) button to display the Use the o o button: PR LIST Pressing the h (Information) button changes the display Press the o o button to choose a VIDEO as follows: terminal. -
Page 14: Zoom Function
Remote control buttons and functions Choose the ZOOM mode ZOOM function 1 Press the c c button to display the ZOOM You can change the screen size according to the picture menu aspect ratio. Choose the optimum one from the following ZOOM modes. -
Page 15: Displaying The Current Time
Remote control buttons and functions Displaying the current time Using the PIP function You can display the Current Time on the screen. You can view two pictures (Main-picture and sub-picture). A TV programme and a video programme from an external Press the h h (Information) button to display the device can be watched at the same time. -
Page 16: Using The Multi-Picture Function
625p, 525p or 1125i signal while the VIDEO-4 cannot be used. picture is displayed as the sub-picture, the PIP • Even if your device is made by JVC, some of these function is cancelled. buttons or any one of the buttons may not work, - The pictures cannot be swapped when a picture of depending on the device. -
Page 17: Teletext Function
Teletext function Basic operation Using the List Mode You can store the numbers of your favourite teletext pages 1 Choose a TV channel with a teletext broadcast in memory and call them up quickly using the colour buttons. 2 Make sure to set the VCR/TV/DVD switch to the To store the page numbers: TV position. -
Page 18: Sub-Page
Teletext function Sub-page Some teletext pages include sub-pages that are automatically displayed. 1 Choose a teletext page that includes sub-pages Sub-page numbers that can be viewed are automatically displayed at the top of the screen. 2 Press the 5 5 buttons to choose a sub-page number Reveal Some teletext pages include hidden text (such as answers to... -
Page 19: Using The Tv's Menu
Using the TV’s menu This TV has a number of functions you can operate using 3 Press the 6 6 buttons to choose a function menus. To fully utilize all your TV’s functions, you need to • For details of the functions in the menus, see the understand the basic menu operating techniques fully. -
Page 20: Picture Setting
PICTURE SETTING Refer to “Using the TV’s menu” (see page 17) for details of WHITE BALANCE displaying the menu. You can select one of three WHITE BALANCE modes PICTURE SETTING (three tones of white) to adjust the white balance of the PICTURE MODE BRIGHT picture. -
Page 21: Picture Features
PICTURE FEATURES Refer to “Using the TV’s menu” (see page 17) for details of Super DigiPure displaying the menu. The Super DigiPure function uses the latest in digital PICTURE FEATURES technology to give you a natural-looking picture. The Super DigiPure function includes the following two functions. DIGITAL VNR AUTO Super DigiPure... -
Page 22: Colour System
PICTURE FEATURES COLOUR SYSTEM PULL DOWN The colour system is chosen automatically. However, if the The PULL DOWN function displays a cinema film picture picture is not clear or no colour appears, choose the colour more smoothly and naturally on the screen. system manually. -
Page 23: Sound Setting
SOUND SETTING Refer to “Using the TV’s menu” (see page 17) for details of SPEAKER displaying the menu. You can turn off the sound from the TV speakers; but you SOUND SETTING should only do this if an audio system is connected to the STEREO/ TV as a substitute for the TV speakers. -
Page 24: Headphone
SOUND SETTING HEADPHONE You need to use the HEADPHONE menu to adjust the volume of the headphones. The HEADPHONE menu can also be used to set whether or not sound comes from the TV speakers when the headphones are being used and to perform the settings for the sound coming from the headphones. -
Page 25: Features
FEATURES Refer to “Using the TV’s menu” (see page 17) for details of To set the CHANNEL GUARD function displaying the menu. 1 Choose CHANNEL GUARD, then press the o button FEATURES “SET ID NO.” (ID number setting screen) appears. SLEEP TIMER BLUE BACK CHANNEL GUARD... - Page 26 FEATURES 3 Press the Number buttons to enter the ID number The lock is temporarily released so you can view the TV channel. If you have forgotten the ID number: Perform step 1 of “To set the CHANNEL GUARD function”. After confirming the ID number, press the b button to exit the menu.
-
Page 27: Install
INSTALL Refer to “Using the TV’s menu” (see page 17) for details of 3 Press the a a button to start the AUTO displaying the menu. PROGRAM function The AUTO PROGRAM menu appears and received TV INSTALL channels are automatically registered in the Programme LANGUAGE AUTO PROGRAM numbers (PR). - Page 28 INSTALL 2 Follow the operation description of a function 2 Press the red button to start the ID function you want to use and operate the function EDIT MOVE: CH / CC This function changes a Programme number (PR) of a TV channel.
- Page 29 INSTALL Sound system 4 Press the Number buttons to enter the remaining CH/CC number Area Country or region System The TV shifts to registration mode. Bahrain, Kuwait, Oman, Qatar, United When the registration is completed, the picture of the TV Arab Emirates, Yemen, etc.
-
Page 30: Changing The Teletext Language Setting
INSTALL Changing the TELETEXT LANGUAGE setting After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function. 1 Display the INSTALL menu When the EDIT menu is currently being displayed: Press the h (Information) to return to the INSTALL menu. -
Page 31: Additional Preparation
Additional preparation Connecting the external devices 1 VCR (composite signal) Connect the devices to the TV, paying attention to the 2 VCR (S-VIDEO signal; Y/C) following connection diagram. 3 VCR for recording (composite signal) Before connecting anything: 4 DVD player (composite signal) •... - Page 32 Additional preparation Connecting devices to the OUT terminal • The output from the AUDIO OUT terminal is not The signals of the images and sound you are currently interrupted by headphone connection to the TV. You viewing with this TV are output through the OUT terminal. cannot cut the sound from the front speaker even if you By connecting a VCR to the OUT terminal, you can record connect a headphone to the TV.
-
Page 33: Ch/Cc Numbers
CH/CC numbers When you want to use the INSERT function on page 26, find the CH/CC number corresponding to the Channel number of the TV channel from this table. The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. -
Page 34: Troubleshooting
Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself. - Page 35 Troubleshooting Other concerns • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV is turned off suddenly, try to press the # (Standby) button to turn on the TV once again. At this time, if the TV resumes a normal state, there is no problem.
-
Page 36: Specifications
Specifications Model LT-Z26S2 Item Broadcasting systems B, G, I, D, K, K1, M Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz Channels and frequencies VHF low channel (VL) =46.25 to 168.25 MHz VHF high channel (VH) =175.25 to 463.25 MHz UHF channel (U) =471.25 to 855.25 MHz •... - Page 40 © 2003 VICTOR COMPANY OF JAPAN, LIMITED 1003-MK-CR-JMT...
- Page 41 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...