Philips T970 AccuVac User Manual page 4

Charging
Charge the Trimmer fully before you start using it
for the first time or after a long period of disuse.
Charge Indications
Low Battery
◗
When the battery capacity drops below its
minimum level, the red low-battery
indicator light starts blinking when you
switch the trimmer on or during trimming
to indicate that the appliance needs to be
charged (fig. 2).
◗
When this happens, there is still enough
energy in the battery for one more
trimming session. When the battery is
completely empty, neither the motor or
the lights will go on. In this case you
can still trim using the cord provided.
Charging
◗
When you start charging, the green
charging light starts blinking (fig. 3).
◗
During charging the blinking green charging
light indicates the level at which the battery
is currently charging. The battery capacity
that is already available is indicated by the
green battery lights that burn continuously
(fig. 4).
Battery Full Indicator
When the battery is fully charged, the bottom
three green lights burn continuously and the
top green light blinks at a very quick rate.
Battery Capacity Indication
Your AccuVac beard trimmer is equipped with
a battery capacity indication. This indication
becomes visible for 5 seconds every time the
Trimmer is switched on or off. The number of
burning green lights indicates the amount of
battery capacity that is available.