Norelco REFLEXPLUS 6863XL User Manual page 16

ENGLISH
16
C
C
C
C
C
C
2 Press the Razor Head Release Button and
remove Razor Head Assembly from the
razor unit.
3 Brush the inside of the razor housing and
Razor Head Assembly.
4 Turn Razor Head Assembly over so that
underside is exposed.
5 Turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
7 Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs it
could take several weeks before optimal shaving
performance is restored.
8 Separate the cutter from the comb.
9 Only brush the cutter in an upward
motion. Use the short bristled side of the
brush.
10 Brush the slots of the comb.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid