Advertisement
4
Press the
power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note: To shut down the projector, press the
5
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press
You can display a QR code, switch between projection sources, and
quickly access various adjustment options from this screen.
6
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
your language and press
system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
To reduce or enlarge the image, turn the zoom ring.
4
To sharpen the image, turn the focus ring.
Note: You can also press the
fine-tune your adjustments. See the online User's Guide for details.
5
Your projector automatically adjusts images that are unevenly rectangular
on the sides (
,
,
the image shape using the projector's Screen Fit feature or keystone
correction buttons (
or
power button twice.
to select it.
. Select Language and press
. Press the Menu button to exit the menu
button on the projector to
, or
), but if necessary you can correct
). See the online User's Guide for details.
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector
Access projector
Turn off projector
. Select
For more information on using the remote control, see the online User's Guide.
Project wirelessly
Follow the steps here to install the included wireless LAN module and connect
the projector over a wireless network. With the PowerLite 2250U, you will
need the optional wireless LAN module (part number V12H731P02).
If you're projecting from a computer, it must have a wireless card or built-in
wireless interface.
1
Turn off the projector and unplug the power cord.
2
Slide the air filter cover latch and open the air filter cover.
3
Remove the screw securing the wireless LAN module stopper and
remove the stopper.
4
Insert the wireless LAN module into the port.
on and off
menus
display
Choose which source
to display
Navigate projector
menus
Access the Home
screen
Advertisement
