U-Line CLR1215 Quick Start Manual page 8

QUICK START GUIDE
1. Turn off water supply and disconnect electrical supply
to product prior to attempting installation.
2. Remove the
grille/access
panel in the front
and the back
panel.Locate
water valve in the
front of the unit
and thread water
supply line
through.
NOTICE
Route the water supply line through the unit so
it does not come into contact with any internal
components other than the solenoid valve.
Normal operation creates some vibration. A
water supply line contacting an internal
component or cabinet wall can cause excessive
noise during operation or damage to the line.
3. On the back panel,
break away filler feature
in bushing with flat
screwdriver.
4. Thread water line
through back panel hole
(with bushing).
5. Turn on water supply and check for leaks.
6. Reinstall back panel and grille/front access panel.
7. Install retaining clip.
Remove
screwdriver
5
u-line.com