Removing Pcb-Main - Samsung NE58F9710WS Service Manual

3. Disassembly and Reassembly

3-3 Removing PCB-Main

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
PRECAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may
be present, and you can cut yourself if you are not careful.
Parts
PCB Main
* Reassembly of All part is the reverse order of disassembly.
Explanation Photo
PCB-Main
11
Explanation
1. Turn off the electrical supply
going to the range.
2. Pull the range away from the
wall so that you can access the
rear panel.
3. Remove cover-back main wire.
(See step 3 on page 10)
4. There is 1 PCB (printed circuit
board) on the rear of the range.