Removing The Optical Drive; Procedure; Post-Requisites - Dell Inspiron 3656 Service Manual

Removing the optical drive

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align and snap the optical-drive bezel to the optical drive.
2 Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
3 Replace the screws that secure the optical-drive bracket to the optical drive.
4 Slide the optical-drive module into the optical-drive bay through the front of the
chassis.
5 Replace the screw that secures the optical-drive assembly to the chassis.
6 Open the side-chassis.
7 Connect the data cable and the power cable to the optical drive.
8 Connect the data cable and the power cable to the hard drive.
9 Close the side-chassis.

Post-requisites

1 Replace the front
2 Replace the computer
46
computer. After working inside your computer, follow
After working inside your
bezel.
cover.
computer. For more safety best
www.dell.com/
Before