Raymarine i70 Installation & Operation Instructions page 14

Example: Expanded system with autopilot
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
Description
AIS receiver / transceiver (AIS350 / AIS650)
Instrument display (e.g. i70)
Life Tag — Man Over Board (MOB) system
Pilot Controller (e.g. p70 or p70R)
Evolution™ Autopilot
SeaTalkng® GPS/GNSS Receiver (e.g. RS130)
SeaTalk to SeaTalkng® converter
iTC-5 converter
ACU (Autopilot Control Unit)
ECI-100
Note: Depending on engine type, it may be possible to connect the engine
system directly to the SeaTalkng® backbone using a SeaTalkng® to DeviceNet
adaptor cable. Without using the ECI-100 the available data will be limited to
supported, standard NMEA 2000 data only.
Vessel / Engine systems
Depth transducer (Analog)
Wind transducer (Analog)
Speed / Temperature transducer (Analog)
Rudder reference
12 V dc / 24 V dc power supply (powering the SeaTalkng® backbone.)