Table of Contents
Advertisement
BKM-62HS HD SDI/SDI Input Adaptor
The BKM-62HS HD SDI/SDI Input Adaptor is a video
signal input adaptor for Sony BVM-A series color video
monitors. When installed in an input option slot on the rear
panel of the video monitor, it provides input and output
connectors for 4:4:4 HD serial digital (dual link), 4:2:2 HD
serial digital, and 4:2:2 serial digital component signals for
the monitor.
Functions
Decoder for HD serial digital signals (dual
link/single link)/SD serial digital signals
The BKM-62HS automatically detects the type of signals
you input and decodes HD serial digital signals and SD
serial digital signals (component). You can also input dual
link HD-SDI 4:4:4 RGB/YP
1080/60I, for example) to the adaptor.
Input and output connectors for HD serial
digital signals/SD serial digital signals
The BKM-62HS is equipped with two input and two
monitor output connectors for HD serial digital signals and
SD serial digital signals.
Note
When 1080/24PsF, 25PsF, or 30PsF signal is input, the
monitor displays it in an interlace (1080/48I, 50I, or 60I)
signal format.
18
BKM-62HS HD SDI/SDI Input Adaptor
P
signals (1080/24PsF or
B
R
Using the input and output
connectors
Configuration of input/output connectors
and signals that may be input
The configuration of the input and output connectors and
the signals that may be input are shown below.
HD serial digital/
SD serial digital
signals
HD serial digital/
SD serial digital
signals
Input of HD serial digital signals/SD serial digital
signals
You can input serial digital signals to the connectors 1
and 3. You can output these signals from the connectors
2 and 4 respectively (Monitor output). You do not have
to attach 75-ohm terminators to the connectors 2 and 4.
Input of dual link HD serial digital signals
You can input LINK A signals to the connector 1, and
LINK B signals to the connector 3. You can output these
signals from the connectors 2 and 4 respectively
(Monitor output). You do not have to attach 75-ohm
terminators to the connectors 2 and 4.
Notes
• The signals can be output from the MONITOR OUT
connectors only when the power of the monitor is ON.
No signal will be output from the connectors when the
monitor is in the standby status.
• The MONITOR OUT signals do not satisfy the ON-
LINE signal specifications.
For details on installation of the BKM-62HS in a video
monitor, see "Installing into Video Monitors" (page 23).
Dual link
HD serial digital
LINK A signals
Dual link
HD serial digital
LINK B signals
Hide quick links:
Advertisement
Chapters
Table of Contents
