Sony FWD-S42E1 Operating Instructions Manual page 63

Menu Function and operation
Color Temp. White tone can be adjusted to suit your preference. Default settings are set when shipped
from factory.
Tip
Restores the default settings by selecting "Reset" on the tone adjusting screen.
Cool Gives white colors a blue tint.
Neutral Gives white colors a neutral tint.
Warm Gives white colors a red tint.
Custom Enables a broader range of white tone to be set than above.
Brightness Boost
Select "On" or "Off". If you select "On", then the picture quality is adjusted to emphasize
brightness.
Notes
• You can only set "Brightness Boost" when "Picture Mode" is set to "Vivid".
• When "Brightness Boost" is set to "On", you cannot adjust the "Backlight",
"Contrast", "Brightness" or "Color Temp." settings.
• When "Brightness Boost" is set to "On", "Backlight" is set to "Max" and "ECO
Mode" is switched "Off", the brightness is at its maximum.
Reset Select "Cancel" or "OK". If you select "OK", it resets all settings of "Picture Mode
Adjust." to default settings.
You can adjust the sound output from the speakers SS-SPG02 (not supplied) with various
Sound Mode
"Sound Mode" settings.
Dynamic Enhances treble and bass.
Standard Flat setting.
Custom For more detailed adjustment.
You can adjust sound tone in detail.
Sound Mode Adjust.
Tip
You can set "Treble" and "Bass" when the "Sound Mode" is set to "Custom".
Treble
Adjusts to increase or decrease treble.
Bass
Adjusts to increase or decrease base.
Balance
Adjusts left/right speaker balance.
Surround
Select "Off" or "On". If you select "On", then the stereo sound for things like movies and
music will be adjusted to a sound with a greater sense of realism.
Reset
Select "Cancel" or "OK". If you select "OK", it resets all settings of "Sound Mode
Adjust." to default settings.
* Only select during video input.
GB
23
GB