Samsung UD6400 Training Manual page 55

Trouble Shooting - No Video (Tuner DTV)
Power indicator LED is off.
Lamp(Backlight) on, no video ?
YES
Check the RF source and
check the connection of RF cable ?
YES
Check the 'signal strength' in Self Diagnosis
menu Strength is enough ?
YES
Check the Power of Tuner ?
Pin #4 of Tuner : B3.3V_Tuner
Pin #2 of Tuner : B1.8V_Tuner
YES
Check the CHIF output of IC801 ?
Pin #10 of Tuner : DIF+
Pin #11 of Tuner : DIF-
YES
Check the LVDS clk signal at output of
Main board.(TX)
TX2_CLK : LV_TX2_DN/DP
TX4_CLK : LV_TX4_DN/DP
YES
Check the LVDS cable?
Replace the T-con / LCD panel?
No
Check a set in the 'Stand-by mode'
NO
Input the RF source properly.
NO
Check the D-TV source.
NO
Change the Main Ass'y.
NO
Check Tuner and IC801(Arsenal).
Change the Main Assy.
Check IC1001(GenoaS) and
NO
IC2001(Parma).
Change the Main Ass'y.
NO
Please, Contact Tech support.