Samsung UD6400 Training Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. LCD TV
  5. UD6400
  6. Training manual

Samsung UD6400 Training Manual

Hide thumbs

Advertisement

Table of Contents

LCD TV
TRAINING MANUAL
UD6500
UD6400
UD6900

Advertisement

Table of Contents
loading

Related Manuals for Samsung UD6400

Summary of Contents for Samsung UD6400

  • Page 1 LCD TV TRAINING MANUAL UD6500 UD6400 UD6900...
  • Page 2 Agenda Inside of UD6500 New Part of UD6500 III. Board description Disassembly Trouble Shooting...
  • Page 3 Inside of UD6V SAMSUNG...
  • Page 4 Items Specification Model Name UN46D6500VFXZA Size (W*D*H) with Stand 1068.40 x 275.0 x 683.60 (mm) Weight with Stand 16.7 (kg) Panel Resolution 1920*1080 S-Video 1 component 480i/p,720p,1080i/p 1 Dsub HDMI 4 HDMI Tuner 1 ATSC/Half NIM/QAM tuner Sound Output 6 ohm, 10W General Sound option SRS TruSurround HD...

  • Page 5: Spec Comparison

    Spec Comparison SAMSUNG SAMSUNG (UD6500 46”) (LC6400 46”) Model UN46D6500VFXZA UN46C6400RFXZA Design Size 1068.4 x 275.0 x 683.6 mm 998.0 X 300.0 X 703.5 mm Diagonal 46” Diagonal 46” Size Panel Resolution 1920 x 1080 1920 x 1080 Viewing angle...
  • Page 6 Control & Connection Panel...
  • Page 7 Control & Connection Panel Rear View...
  • Page 8 Control & Connection Panel...
  • Page 9 Control & Connection Panel...
  • Page 10 Control & Connection Panel...

  • Page 11: Remote Control

    Remote control...
  • Page 12 Inner Feature of UD6V IP Board, Main Board, Panel Power cable Power Ass’y Main Ass’y WiFi cable LVDS cable T-con board WiFi module Speaker...
  • Page 13 Inner Feature of UD6000 32” / 40” / 46” / 55” IP Board, Main Board, Panel...
  • Page 14 Arsenal / Valencia Block Diagram DDR3-1333 DDR3 I/F DDR3-1333 DDR3-1333 256MB x4 DDR3-1333 256MB 256MB 256MB 667MHz OneNAND 128MB MoviNAND GENOA-S TS Parallel Wise Link USB 2.0 (1 (HDD) USB 2.0 ,2, 3) USB Hub Tuner Arsenal WW (AU6275) • Cortex-A9 (@600MHz) Wi-fi Interrupt USB 2.0...
  • Page 15 Arsenal WW Internal Block Diagram...
  • Page 16 GenoaS Internal Block Diagram...
  • Page 17 Video Input path Analog Digital Tuner Sound O_SPDIF_TX Optical AE30 SIF_I2S B_I2S_R T-half NIM TX1_SDOUT Arsenal O_I2S_T OUT A- HDMI Sound (DATA0) ASN_SPDIF SPDIF_OUT I_SPDIF_RX TAS5275 HP_LINE Head HPL/R_O Genoa-S Phone HPL/R_I ※ TX1 DATA0/1 라인별 차이 구주 / 성장 1.
  • Page 18 Reset Tree ① MICOM_nRESET RT9818 nRESET ⑥ SW_PVCC Standby (Reset IC) B13V ② SW_POWER Weltrend SMPS MICOM SW_INVERTER ⑧ ④ POWER_DET ③ SYS_nRESET ArsenalWW RT9818 B+ Power (Reset IC) KFG1G16U2D PANEL (OneNAND) Micom_RESET RESET TUNER ⑤ AK4686 nRESET_OUT Function ⑤ RESET_BT (S-Codec) (Bluetooth)
  • Page 19 SCL_MAIN_EEPROM I2C0_CL AT24C256BN SDA_MAIN_EEPROM (0xA0) I2C0_D SCL_TUNER Arsenal WW TUNER I2C1_CL SCL_ASN SDA_TUNER (0xC2) SDA_ASN ATSC:0x26 I2C1_D DVB-T:0x06 / DVB-C:0x16 LNBH23 (EU-TS) (0x14) SCL_C I2C2_CLK SIL9287 SDA_C (0xB0) I2C2_DAT (CS2,3공용핀) Audio Codec AK4686 (0x24) Sound AMP Genoa-S TAS5725(0x44) I2C3_CLK SCL_PANEL SCL_TCON PANEL Switching IC...
  • Page 20 UART Bluetooth GENOA-S TX_DEBUG UART0_TX D-SUB UART0_RX 3X/Y RX_DEBUG Internal MICOM FRAME_SYNC_OUT 74HC4052D MUART0_TX FRAME_SYNC_IN 0X/Y MUART0_RX ADM3232 2X/Y 1X/Y MTX1_AUTOWALL MUART1_TX MUART1_RX MRX1_AUTOWALL MTX2_HOTEL SW_SEL1/2 TDB_LOGIC LVDS Connector MRX2_HOTEL (PDP Option) RDB_LOGIC TDA_MICOM MUART2_TX MUART2_RX RDA_MICOM Sub MICOM WELTREND...

  • Page 21: Power Tree

    Power Tree A5V 0.7A 74HC4052D UART 1.7~6.5V/0.25A 0.041[A] A3.3V 41mA S-1206B33 WELTREND Sub MICOM S-24CS02AFJ Sub EEPROM MAX3222 Debug port Function B13V 2.37A 750mA PANEL_13V_VCC 750mA PANEL(46” 120 LED) 계산치 : 1.91[A] 실측치 : 1.1[A] 887mA B1.2V SIL9389 4.5~18V/3A/84% 670mA 1557mA 168mA ASN_1.2V...
  • Page 22 Reset Timing Sequence MICOM_nRESET DPMS DPMS Power Master ENTER Normal Normal Operation DPMS MODE Operation Stand by MICOM_nRESET *Device Port Initial (CPU & Smicom) *Device Reset Period SYS_nRESET nRESET_OUT *Device Initial FRC_RESET PCI_NRESET 50ms 이하 50ms SW_PVCC 이하 100ms 50ms 50ms 이상...

  • Page 23: New Function

    New Function of UD6V SAMSUNG...
  • Page 24 Auto Motion Plus 120Hz Removes drag from fast scenes with a lot of movement to provide a clearer picture. * If you enable Auto Motion Plus 120Hz, noise may appear on the screen. If this occurs, set Auto Motion Plus 120Hz to Off.

  • Page 25: Dolby Digital Plus

    Dolby Digital Plus...

  • Page 26: Media Play(Usb & Dlna)

    Media Play(USB & DLNA) Media Paly_USB...
  • Page 27 Media Play(USB & DLNA)
  • Page 28 Media Play(USB & DLNA) ● Supported Format vs. ‘08 ’08 Video format ’09 Video format •There are some technical differences between USB(local play) and DLNA(network play). So DLNA may have some limitations of functions such as play, seek, jump in unusual case.

  • Page 29: Dock Mode

    internet@TV Side br Dock Mode Mode...
  • Page 30 Network server Model A Authentication Compatible SW query SW download •Secure & safe upgrade User •Fault tolerancing • automatic upgrade SW management • high speed downloading Internet Model B • reliable upgrade •Scalable service •Secure & reliable Model C...
  • Page 31 ■ Purpose of OTN because of variable contents and devices, TV softwere will be more and more complicate. So it is necessory that TV softwere is updated real time. Server Manager 1. DTV registration info. 2. Verify registration - Install error info. - Model info.

  • Page 32: Home Network Center

    Home Network Center • Home Network Applications that bulit in networking DTV. • Message: TV display the message, phone call list, schedule of cell phone by network. Phone call Schedule • Media: TV play the movie, picture, music that stored in cell phone by network.
  • Page 33 Supported PC timing...
  • Page 34 Supported PC timing...
  • Page 35 PIP/POP Table Amber(08’) LC6400(09’/10’) * PIP support .- You can view PIP screen when the main picture is HDMI1,2,3,4, Component 1,2 or PC...
  • Page 36 HDMI/DVI edit name Amber(08’) LC6400(09’/10’) HDMI2/DVI HDMI1/DVI * Auto : System judge that source type automatically, and select sound input(HDMI/DVI).
  • Page 37 Disassembly DISASSEMBLY SAMSUNG...
  • Page 38 Disassembly Disassembly of LB6T...
  • Page 39 Disassembly Disassembly of LB6T...
  • Page 40 Disassembly Disassembly of LB6T...
  • Page 41 Disassembly Disassembly of LB6T...
  • Page 42 Disassembly Disassembly of LB6T...
  • Page 43 Disassembly Disassembly of LB6T...
  • Page 44 Disassembly Disassembly of LB6T...

  • Page 45: Troubleshooting

    Trouble Shooting Trouble Shooting SAMSUNG...

  • Page 46: Check List For Initial Operation

    Trouble Shooting Check List for Initial operation -. Power cord in to the set -. Power swich on -. You can sound IP relay (not for 40”) * If you can’t sound, check the STB_5V appear -. Back-light on * If back-light doen’t on ->...
  • Page 47 Trouble Shooting Inform to change the Assembly -. Check the Side-Lable Ver. in set (important) -. Order to the item with Side-Lable Ver. -. If you change the item, see the service-bulletin for setting the factory option. Inform about error messages -.

  • Page 48: Trouble Shooting - No Power

    Trouble Shooting - No Power Power indicator LED is on? Check a connetion power code. Check the backlight on, when 20p cable unconnected ? Check ‘Stand-By 5V’ ? No - BD203 : A5V Change 20p cable. Change Main Power Ass'y. Check ‘Power input of Main Ass'y’...
  • Page 49 Trouble Shooting – No Video (analog PC) Power indicator LED is off. Check a set in the ‘Stand-by mode’ Lamp(Backlight) on, no video ? or ‘DPMS mode’. Check the PC source and Input the analog PC signal properly. check the connection of D-SUB ? Check the signal appear at input of IC901 ? PC_RED : BD401 PC_GREEN : BD402...
  • Page 50 Trouble Shooting – No Video (analog PC)
  • Page 51 Trouble Shooting – No Video (HDMI) Power indicator LED is off. Check a set in the ‘Stand-by mode’ Lamp(Backlight) on, no video ? Check the HDMI source and Input the HDMI signal properly. check the connection of HDMI cable ? Check the signal at Input of Main board ? HDMI1 Clk : Pin #31,#32 of IC601 DATA : Pin #33~#38 of IC601...
  • Page 52 Trouble Shooting – No Video (HDMI)
  • Page 53 Trouble Shooting – No Video (Tuner CVBS) Power indicator LED is off. Check a set in the ‘Stand-by mode’ Lamp(Backlight) on, no video ? Check the RF source and Input the RF source properly. check the connection of RF cable ? Check the Power of Tuner ? Pin #4 of Tuner : B3.3V_Tuner Change the Main Ass'y.
  • Page 54 Trouble Shooting – No Video (Tuner CVBS) Power indicator LED is off. Check a set in the ‘Stand-by mode’ Lamp(Backlight) on, no video ? Check the RF source and Input the RF source properly. check the connection of RF cable ? Check the Power of Tuner ? Pin #4 of Tuner : B3.3V_Tuner Change the Main Ass'y.
  • Page 55 Trouble Shooting - No Video (Tuner DTV) Power indicator LED is off. Check a set in the ‘Stand-by mode’ Lamp(Backlight) on, no video ? Check the RF source and Input the RF source properly. check the connection of RF cable ? Check the ‘signal strength’...
  • Page 56 Trouble Shooting - No Video (Tuner DTV)
  • Page 57 Trouble Shooting - No Video (Video CVBS) Power indicator LED is off. Check a set in the ‘Stand-by mode’ Lamp(Backlight) on, no video ? Check the video source and Input the video source properly check the connection of video cable? Check the CVBS signal at Input of IC801(Arsenal) ? Check CN502 or CN501.
  • Page 58 Trouble Shooting - No Video (Video CVBS)
  • Page 59 Trouble Shooting - No Video (Component) Power indicator LED is off. Check a set in the ‘Stand-by mode’ Lamp(Backlight) on, no video ? Check the component source and check the Input the component source properly. connection of component cables(Y,Pb,Pr) ? Does the component data appear at ? Comp1 Y : R537 Check CN501 or Compnent gender.
  • Page 60 Trouble Shooting - No Video (Component)
  • Page 61 Trouble Shooting – No Sound Check the source and check the connection Input the sound source properly. of sound cable (Comp/PC/DVI to HDMI) ? Check the signal at input of Main board? Check CN501, CN402. AV1, COMP1 R : R541 / L : R539 Change the Main Assy.
  • Page 62 Trouble Shooting – No Sound...

  • Page 63: Troubleshooting

    Trouble Shooting DOs after changing assembly - Adjust Panel option, and install EDID data in Factory mode <Factory menu> Check Point Model : UD6000 Type : 32” : 40” : 46” : 55” : ①EDID on -> ②EDID WRDTE ALL...
  • Page 64 Trouble Shooting Factory mode...
  • Page 65 Trouble Shooting Factory mode...
  • Page 66 Trouble Shooting Factory mode...
  • Page 67 Trouble Shooting Factory mode...
  • Page 68 Trouble Shooting Factory mode...
  • Page 69 Trouble Shooting Factory mode...
  • Page 70 Trouble Shooting Factory mode...
  • Page 71 Trouble Shooting Compatibility problem HDMI 1. Symptoms : Star noise. Trouble shooting : Factory mode -> Control -> Config option -> HDMI EQ Change Factory mode -> Sub Option -> DVOUT CD : level change 2. Symptoms : Can not detect HDMI devices. Trouble shooting : Factory mode ->...

  • Page 72: White Balance

    White balance Adjustment (Calibration -> White Balance) Calibration Pattern : MIK K-7256 #24 ‘Chessboard Pattern’ Set Aging time : 60min↑ - HDMI Calibration (Time #6, 720p) Calibration - COMP (Time #6, 720p) Calibration - CVBS (Time #3, NTSC-J) Calibration - PC (Time #21, 1024*768) <Factory menu>...
  • Page 73 White balance Adjustment (Calibration -> White Balance) White Balance Test : CA-210 Pattern : MIK K-7256 #92 ‘Flat W/B Pattern’ Set Aging time : 60min↑ <Factory menu> <Adjustment value> 40inch Important Spec. SUB-CONTRAST: 133, Gamma: 0.95...

  • Page 74: Usb Download

    USB Download USB Download...

This manual is also suitable for:

Ud6900Ud6500

Table of Contents