License options
•
High performance T1022 processor with two cores operating at 1.2 GHz delivers high performance, scalability, and advanced
Fabric Vision functionality.
•
One 10BASE-T / 100BASE-TX / 1000BASE-T RJ45 connector Ethernet port for management connection. In conjunction
with EZSwitchSetup, this port supports switch IP address discovery and configuration, eliminating the need to attach a serial
cable to configure the switch IP address.
•
One RS-232 3-wire (Tx, Rx, and Gnd) universal asynchronous receiver/transmitter (UART) serial port to BMC with RJ-45
connector for debugging initial switch setup (if not using EZSwitchSetup) and factory default restoration. Integral LEDs remain
unlit at all times.
•
One internal e-USB module provides 2 GB of persistent storage, increased serviceability, and error logging functionality by
facilitating easier firmware upgrades and downloads of the system log files.
•
One external USB connector.
•
Two hot-swappable redundant integrated power supply and fan assembly field-replaceable units.
•
48 hot-pluggable SFP+ optical transceiver slots and 4 hot-pluggable QSFP optical transceiver slots.
•
64 bicolor (green/amber) LEDs to indicate the status for each port.
•
One green LED to indicate valid system power.
•
One bicolor (green/amber) LED to indicate the system status.
•
Two Ethernet LEDs: one bicolor (green/amber) LED to indicate link at 1000/100/10 Mbps and one green LED to indicate
activity.
•
SEEPROM for switch identification.
•
Real-time power monitoring.
•
Real-time voltage monitoring.
•
Real-time fan monitoring including airflow direction.
•
Real-time digital thermometers for temperature monitoring.
•
Real-time clock (RTC) with battery.
License options
The Brocade G620 uses a capacity-based Ports on Demand (POD) license method. An Integrated Routing (IR) license is required to
enable EX_Port on this device. Refer to the Brocade Fabric OS Software Licensing Guide for more details.
Port-side view
The following illustration shows the port-side view of the Brocade G620 Fibre Channel switch.
14
Brocade G620 Hardware Installation Guide
53-1003990-06