Cleaning - Norelco 6853XL Product Manual

ENGLISH
14

Cleaning

3 Replace razor head assembly.
Once a week: Razor
Regular cleaning guarantees better shaving
results.
Always turn razor off, unplug from outlet and
remove cord from razor before cleaning.
C
Clean the top of the razor with the
1
supplied brush.
C
Press the Razor Head Release Button and
2
remove Razor Head Assembly from the
razor unit.
C
Brush out hairs from the inside of Razor
3
Head Assembly and hair chamber.
C
Replace the Razor HeadAssembly back on
4
razor.
Every Two Months: Razor Head
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
Turn razor to Off (O) position, remove plug
1
from outlet and disconnect cord from razor.
C
Press the Razor Head Release Button and
2
remove Razor Head Assembly from the
razor unit.
C
Brush the inside of the razor housing.
3
Turn Razor Head Assembly over so that
4
underside is exposed.
C
Turn wheel of frame counterclockwise.
5
6 Remove the frame and brush clean.
C
Remove and clean one cutter and comb at
7
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
Separate the cutter from the comb.
8
C
Only brush the cutter in an upward
9
motion. Use the short bristled side of the
brush.
ENGLISH
15