Specifications; Placing The Unit - Pyle PSBV210WIFI User Manual

SPECIFICATIONS

Power Supply.........................................................AC:100-24V, 50/60Hz
Peak RMS Output.........................................................................300W
Input Sensitivity..............................................................400mV ± 50mA
S/N(A Weight)...........................................................................≥80dB
Channel Separated Rate (1KHz)......................................................≥ 40dB
Woofer Impedance........................................................................8ohm
Tweeter and full range speaker impedance.............................................4ohm
THD (1KHz, 1W, 8Ohm)...............................................................≤ 0.5%
Frequency Response .............................................................20Hz-20KHz
Dimensions (WXDXH)...................................................... 23.8'' x 9.8'' x 4.7''
Weight.....................................................................................13 lbs.
NOTED: Specifications are subject to change for improvement without prior
notice.

PLACING THE UNIT

Take advantage of 3D stereo technology, you can listen to surround sound without
extra speakers. Placing your system as follows, and turn on BASS+/- or TRE+/- effect
by pressing these Buttons on the remote control, you will get the surround sound
effects.