How To Use The Remote Control - Pyle PSBV210WIFI User Manual

HOW TO USE THE REMOTE CONTROL

1. Battery Installation:
a. Slide and lift up the battery door.
b. Install two "AAA" size batteries (included) into the battery compartment
according to the polarity markings inside battery compartment.
c. Replace the battery door
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
3. Do not mix different types of batteries together (e.g Alkaline,
4. If the device is not to be used for a long period of time, remove
5. Do not try to recharge batteries which are not designed to be
6. Do not dispose of batteries in fire. Batteries may explode or leak.
2. Effective scope of the remote control
The remote control has an operating range which is less than 16 feet and 30
degree angle left or right away from the system.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device.
batteries as indicated next to the battery compartment. Reversed
batteries may cause damage to the device.
Rechargeable and Carbon-zinc) or old batteries with fresh ones.
the batteries to prevent damage or injury from possible battery
leakage.
recharged. They can overheat and rupture.