Alarm Feature Programming - Marksman X4 Installation Manual

Alarm Feature Programming (Group 1)
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
One Chirp
Button One LED Pulse
(Default Setting)
All Chirps On
Manual Arming
Automatic Rearm Off
Instant Door Ajar
Error Chirp
+
Car Jacking Alarm Off
Normal function
+
Horn Output
Normal Horn Output
pulse duration
+
Five Chirps
Five LED Pulses
PVID 4 Horn Output
S-M-L-S-M-L
Step 4:
Exit Program Mode
(continued)
Step 3
Remote Feature Programming
Two Chirps
Two LED Pulses
- OEM type chirp mode -
Silent arm. Arming
confirmation chirp w/
second button press
Tamper indicator chirps on
Automatic Arming without
Automatic Door Locking
Automatic Rearm On
45 Second Delay
Door Ajar Warning
Manual
Car Jacking Alarm On
Horn Output for alarm
trigger, panic and
car-finder only
PVID 1 Horn Output
S-S-S - L-L-L - S-S-S
Six Chirps
Six LED Pulses
PVID 5 Horn Output
S-S - L - S-S
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will
confirm exit of the programming mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the
programming mode.
Three Chirps
Three LED Pulses
All Chirps Off
Automatic Arming with
Automatic Door Locking
Door Ajar Warning Off
Automatic
Car Jacking Alarm On
PVID 2 Horn Output
S-L-S-L
Note: Horn output settings are valid for the
Light Brown wire only.
Four Chirps
Four LED Pulses
Arm/ Disarm Chirps Off
Tamper Indicator chirps on
PVID 3 Horn Output
S-S-S-L
15