Motion Detect - Philips DVR2104 User Manual

9.Detect
Press "detect", menu press è to enter the following window:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Startup schedule detect: MD detect will only be effective in the scheduler
11. Startup MD detection: The video recording will detect all the time. The
12. The video recording can do the select setting in each picture
PDF 文件使用 "pdfFactory Pro" 试用版本创建
Choose picture: picture 1, picture 2, picture 3, and picture 4. The picture
can be set independently.
Setting effect: when the user has chosen either one from the four
pictures without pressing the "setting effect", the system will play the four
pictures instead of one.
Detect recording: it is the detection recording catalogue with normal and
alert to choose from. The video recording has to be set in "guard" when
alert is chosen.
Detect sensitivity: seven levels (highest, higher, high, middle, low, lower
and lowest) to choose from according to different live environment.
Video lost detect: the default is close. If it is enable, when the image is
viciously covered, the video recording will alert according to the video
lost sensitivity.
Video lost sensitivity: seven levels to choose from according to different
live environment.
Recording time: to set the time of detect recording.
Area select: to divide the live picture to 16 areas. User can set the whole
16 areas to be "yes" or "no", and also set some of them according to his
own need.
Lost detect: to startup/stop the lost picture. When "startup" is chosen, the
video recording will alert when the information is destroyed. User can
also set when MD detect to get into effect. (startup schedule detect/MD
detect)
and only when the schedule setting is detect.
schedule detect is not functioning now.
21
www.fineprint.cn