Pioneer BDP-LX54 Service Manual page 28

1
QQ
3 7 63 1515 0
A
To Reset this Player
• If this Player receives strong interference from a source such as excessive static electricity, strong external noise,
malfunction of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors like
the Player not accepting an operation may occur. Press and hold u STANDBY/ON on the Player until "RESET" appears on
the front panel display when the Player does not operate properly even after the power has been turned off. Then turn on the
power again.
• It may take several minutes until completion as the system check will be executed when the power is turned ON.
Please wait until the indicator lights up in this case.
• Since all settings including the language setting stored in memory are also reset when a reset has been performed, they
must be set again.
• When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the
problem, contact the nearest service center approved by Pioneer.
B
[2] On-screen Error Messages
Messages Relating to BD disc and DVD disc
• The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the operation
is not correct.
Error Message
C
Cannot play.
Incompatible disc.
TE
L 13942296513
Cannot operate.
D
This USB memory is not formatted
properly. Please format the memory in
USB memory management.
The Connected USB Memory cannot
be used. It should be compliant with
USB 2.0.
Messages Relating to FAN MOTOR
• When FAN motor is abnormal, the unit return to standby mode, if the below message appear on the screen,
E
check the FAN motor and the FAN motor control circuit
The Fan On the Rear Panel May Not Be Working Correctly, Check The Fan
www
F
* The fan used in this product starts its rotation at the same time as the power is turned on and stops as the
power is turned off. It is not controlled by temperature etc.
28
1
http://www.xiaoyu163.com
2
Possible Error
• The disc cannot be played back with this
Player.
• If you load a disc which cannot be played
with this Player (i.e. a scratched disc), or if
you load a disc upside down, this message
will appear, and the disc tray will automatically
pop out.
• Occurs if the loaded disc cannot be played
because it is a non-standard disc or
scratched, etc.
• Occurs if an operation is incorrect.
• Occurs if there is a formatting error.
• Occurs if USB memory not compliant with
USB 2.0 High Speed (480Mbit/s) is used
(i.e. USB 1.0/USB 1.1).
Error Message
Main FL Display Unit
x ao
y
FAN ERR
. i
2
http://www.xiaoyu163.com
3
8
Q Q
3 6 7 1 3
u163
.
BDP-LX54
3
4
2 9 9 4 2 8
Suggested Solution
• Check the disc, and load it correctly.
1 5 0 5 8 2 9
• Remove the disc.
—
• Format the USB memory again.
• Connect USB 2.0 High Speed
(480Mbit/s) compliant USB memory.
m
co
4
9 9
9 4 2 8 9 9