Removing the Camera Board
1. Perform the
2. Disconnect the camera cable from the camera board.
3. Gently pry the camera board off the LCD back cover.
NOTE:
Machine Maintenance
Downloaded from
www.Manualslib.com
"Removing the LCD
Figure 3-51. Camera Cable
Figure 3-52. Camera Board
NOTE:
A circuit board that is >10 cm2 has been highlighted with a yellow rectangle in
Figure
3-52. Follow the local regulations for disposing this type of circuit board.
manuals search engine
Bezel" procedure described on page 3-40.
0
3-41