Removing Clogs - Kenmore 10325 Use & Care Manual

REMOVING CLOGS
TO REMOVE CLOG FROM HOSE
Frequently check air path to make sure it
is free of obstructions
1. PressWAND
RELEASEbutton. O
2. Pull up to
release wand.
3. Lift wand from
vacuum cleaner -- Handle
O
Wand
Release
Button
4. Plug in the vacuum cleaner and turn it
on,
5. Stretch the extension hose to maximum
length and then allow the hose to return
to its natural length.
6. Reinstall hose and wand onto vacuum
cleaner. See ASSEMBLY (pages 6).
TO REMOVE CLOG FROM FLOOR/TOOL
SELECTOR
Frequently check FLOOR/TOOLS selector
to make sure it is free of obstructions.
1. Press tabs on FLOOR/TOOLS selector
cover and remove.
FLOOR/TOOLS
Selector
Tab
2. Remove
FLOOR/TOOLS
selector and
clean any debris
or clogs located
in valve area.
FLOOR
_3. Reinstall
_ LOOR/TOOLS
selector as
\ shown.
3. Reinstall FLOOR/TOOLS selector cover.
Make sure tabs snap into place. A
noticeable click should be heard.
FLOOR/TOOLS \
TO REMOVE CLOG FROM PET
HANDIMATE
=
CAUTION
_To reduce the risk of injury from
_movlng parts, remove Pet HandiMate
_from. vacuum hose or wand before
servicing.
Frequently check air
path to make sure it is
free of obstructions
=20 =