Table of Contents
Advertisement
System Menu - Setup
{ Video output }
Choose the type of video output that
matches the video connection between
the DVD recorder and your TV.
– { RGB•CVBS} : For RGB or CVBS
connection.
– { S-Video } : For S-Video connection.
– { Automatic } : The output setting will
automatically follow the video signal
received.
Audio output
After connecting the DVD recorder to
your TV and other devices, you may need
to change the digital output setting.
Adjust the Digital Output only if you used
the DVD recorder's COAXIAL socket.
{ Digital output }
– { All } : Select this if you use the
COAXIAL socket to connect the DVD
recorder to a stereo receiver that has a
built-in Multi-Channel decoder.
– { PCM } : Select this if the connected
audio equipment is not capable of decoding
multichannel audio. Dolby Digital and
MPEG-2 multi-channel signals are converted
to PCM (Pulse Code Modulation).
– { Off } : Select this to deactivate the digital
audio output. For example, if you use the
AUDIO OUT sockets to connect the DVD
recorder to a TV or Stereo system.
TIPS:
Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
58
1DVDR6xx_Eng00_13454c
(cont'd)
Language
For more information on this menu,
please see page 28 "Setting the language".
58
3139 246 13454
9/28/04, 1:26 PM
Advertisement
Table of Contents
