Table of Contents
Advertisement
2. Configure details of the profile by checking the appropriate check boxes as shown below:
F
V
IELD
Profile Name
Profile name as selected
in the <Edit Profile> screen
Active Alarms
1-Touch Alarm
Each channel:
(front panel)
Enabled or Disabled
Video Motion
Each channel:
(via motion detectors) Enabled or Disabled
Video Dark
Each channel:
(capped lens alarm)
Enabled or Disabled
Auxiliary
Each channel:
(contact closure via
Enabled or Disabled
alarm inputs)
Relay Output
Each channel:
Enabled or Disabled
Record Video
Each channel:
• Continuous
• Event Only
• Do Not Record
Camera 1 only:
Record Audio
Enabled or Disabled
Image Quality
Each camera:
• High
• Medium
• Standard Plus
• Standard
Time Lapse Quality
Each camera:
• Real Time (full motion)
• (NTSC)
• (PAL)
Estimated
Calculated
Recording Time
X
X
X
X
ALUES
2, 5, 10, 15, 30, 60 images/sec
2, 5, 9, 12, 25, 50 images/sec
D
E
EFAULT VALUE
XPLAINED
[profile number]
Name of the selected profile.
Enabled
If enabled (box is checked),
the corresponding alarm triggers
high quality real time recording.
Disabled
Duration of alarm recording is
determined by alarm settings
(see Section 7.4).
Disabled
If enabled, an alarm on the channel
triggers a relay output response.
Continuous
Defines type of recording for
each channel.
Event Only records pre-alarm
video for the pre-alarm time
(see Section 7.4.1).
Audio available on Channel 1
Disabled
if Video is enabled.
High
Setting image quality lower extends
the record time.
Real Time
Lower time-lapse setting extends
the record time.
Calculated
Time is estimated and is based
on the current profile running
continuously without alarms.
16
Advertisement
Table of Contents
