Mounting and Installation
For public disclosure
5.7.2.2 IP Address Setting
The QuickPanel
+
Operator Interface provides two methods to set an IP address:
•
DHCP (Dynamic Host Configuration Protocol)
The network server assigns an IP address during QuickPanel
must be a DHCP server on the connected network for a valid IP address to be
assigned. Contact your network administrator to ensure correct DHCP server
configuration.
Manual Method
•
Specify the numeric addresses obtained from your network administrator for the
QuickPanel
+
IP Address, Subnet Mask and Default Gateway (if applicable).
Note Run the
Backup utility
to save the settings.
+
initialization. There
GFK-2847R 77