HP ProLiant DL170e G6 Software Configuration Manual page 21

Table 13
LAN Configuration submenu fields
Field
BMC LAN
Configuration
Current IP Address
Current Subnet Mask
Current Gateway
LAN Protocol Control
Wake-On LAN
Figure 17 Watch Dog Timer Reset submenu
Table 14
Watchdog Dog Timer Reset submenu fields
Field Description
IPMI Watchdog Set this value to allow BMC to reset if the operating system crashes
Timer or hangs. This is the default setting.
Description
Set the value prevent support from BMC NIC allocation.
The option specifies DHCP (Dynamic Host Configuration Protocol) IP
source. The optimal setting is Static. The setup default is DHCP.
Set this value needs you manual to set the IP source.
Set this value allows dynamic get the IP source.
The option specifies Current subnet mask, it auto gets the IP subnet
mask; you can setup this value when disabled share NIC mode and
DHCP IP source.
The option specifies Default gateway, it auto gets the IP subnet
mask. You can setup this value when disabled share NIC mode and
DHCP IP source.
Disable HTTP/Telnet/Ping protocol on the BMC.
Enable HTTP/Telnet/Ping protocol on the BMC. This is the default
setting.
Set this value will enable wake on LAN. The setting default value is
Enabled.
Set this value will disable wake on LAN.
Options
Dedicated
Static
DHCP
Disabled
Enabled
Enabled
Disabled
Options
Reset System
System BIOS configuration 21