HP ProLiant DL170e G6 Software Configuration Manual page 17

Table 9
South Bridge ACPI Configuration submenu fields
Field
High Precision Event
Timer
IPMI Configuration submenu
Figure 11 IPMI Configuration submenu
Table 10
IPMI Configuration submenu fields
Field
SEL Configuration
Serial Port
Configuration
LAN Configuration
Watch Dog Timer
Reset
Description
Enable High Precision Event Timer. This is the default setting.
Disable High Precision Event Timer.
Description
Select SEL Configuration in the left frame of the screen to go to the submenu for that item.
Then you can press Enter to enter its submenu. You can display a submenu about SEL
Configuration option by highlighting it using the <Arrow> keys.
Select Serial Port Configuration in the left frame of the screen to go to the submenu for
that item. Then you can press Enter to enter its submenu. You can display a submenu
about Serial Port Configuration option by highlighting it using the <Arrow> keys.
Select LAN Configuration in the left frame of the screen to go to the submenu for that
item. You can display a submenu about LAN options by highlighting it using the<Arrow>
keys. Set LAN Setup options are described in this section. The Set LAN BIOS Setup
screen is shown below (When you have a LO100 Device, this item will display).
Select "Watch Dog Timer Reset" in the left frame of the screen and press<enter> to go to
the submenu for that item. That will display POST Watchdog Timer Action, BMC Watch
Dog Time Out; you can change the default value.
Options
Enabled
Disabled
System BIOS configuration 17