Sony SLV-K877MN/PS Operating Instruction page 9

4
Press RF CH SET.
RF CH
SET
The TV system indicator appears in the display window.
Press PROGRAM +/– to select the desired TV system.
PROGRAM
If your TV system is
B/G
D/K
I
5
Tune the TV to the same channel as that
shown in the display window so that
the picture on the right appears on the
TV screen.
Refer to your TV manual for tuning
instructions.
If the picture does not appear clearly,
see "To obtain a clear picture from the
VCR" below.
6
Press RF CH SET.
RF CH
SET
You have now tuned your TV to the VCR. From now on, whenever
you want to play a tape, set the TV to the video channel.
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 5 above, press PROGRAM +/–
in step 5, so that another RF channel appears. Then tune the TV to the new
RF channel until a clear picture appears.
Note
• If you set the wrong TV system, you may have no sound or sound may be distorted
(noisy sound).
RF
Select
G
K
I (SLV-K867CH/PS only)
SONY VIDEO CASSETTE
RECORDER
G
11
Getting Started