Connect Power; Power On/ Standby Mode - Honeywell OVD270 Instruction Manual

•
Main Unit Dimensions (WxHxD): 298 x 114 x 98mm /
11.73" x 4.49" x 3.86"
•
Main Unit Weight: 1.25Kg
SET UP
Connect Power
1. Connect the AC Power Adapter cable into the DC
Jack on the back-side of the Ovale™ Wireless
Docking Speaker.
2. Plug the AC Power Adapter into an available AC
Electrical Outlet.
3. Press the Button to turn ON the Ovale™
Wireless Docking Speaker. The LED Display Screen
will switch ON.
4.
For Adapter
Model No :HK‐AX‐120A200‐CP
Manufacturers:
HON-KWANG ELECTRIC(SHENZHEN)CO.LTD
Set Clock Time by remote control
1. Make sure Ovale™ is in Standby Mode, or switch to
Standby Mode by pressing and holding the
function button for 2 seconds until the Display Screen
shows the clock time.
2. Press and hold the CLOCK Button on the Remote Control
for about 2 seconds.
3. Press the ▲and ▼Button on the Remote Control to select
a 12 or 24 Hour display format. Press the CLOCK Button to
confirm.
4. Press the ▲and ▼Button again to select the Hour time
setting. The Hour digits will blink while you select the
correct Hour digit. Press the CLOCK Button to confirm.
5. When the Hour digit has been set, press the ▲and
▼Button again to select the Minute setting. The Minute
digits will blink while you select the correct Minute digit.
Press the
6. CLOCK Button to confirm.
Set Clock by main unit
1. Make sure Ovale™ is in Standby Mode, or switch to
Standby Mode by pressing and holding the function
button for 2 seconds until the Display Screen shows
the clock time.
2. Press and hold key ' –' for 2 second, 24H will blink on the
display, then press '+' to select 12 or 24 Hours display
format. Press '‐' to confirm.
3. Press the key '+' to select hours, then press '‐' to confirm.
Again, press key '+' to select minutes, then press key '‐
' to confirm.
Power On/ Standby Mode
1. Press the
Docking Speaker. The speaker and the LED Display Screen
will automatically switch to the last selected Play Mode.
2. Press hold the button
speaker to a Standby Mode. In Standby Mode, the entire
unit switches off and only the clock time will appear on
the LED Display Screen.
IMPORTANT: Unplug the AC Power Adapter to completely
switch off the speaker and Clock Display Screen. All Clock,
Alarm Clock and Radio Station Preset Channels will be
forgotten and must be reset upon reconnecting the power to
the speaker.
Sleep Timer
The Ovale™ can switch to Standby Mode automatically after a
set period of time.
1.
Press the SLEEP Button repeatedly on the Remote
Control to select a period of time before the Ovale™
switches to Standby Mode. Choose from 90, 60, 30
or 15 minutes.
2. After choosing the Sleep Mode time, the LED Display
Screen will display '.' on the top‐left corner. This
indicates that the Sleep Timer is activated and the
Ovale™ will automatically switch to a Standby mode
within the set period of time.
IMPORTANT: After the Ovale™ switches to Standby Mode,
the Sleep Timer is deactivated and must be reset again the
next time you wish to set s Sleep Timer.
Button to switch ON the Ovale™ Wireless
for 2 seconds to switch the