Philips DVDR3370H Owner's Manual page 42

If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case,
switch off the automatic function.
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2
' using D or C .
Select '
3
Select line '
4
Select line '
5
Select '
6
Confirm with OK .
7
Change the time in line '
your remote control.
8
Check '
To select between the fields, use B or A .
Change the information with D , C or the number buttons
0..9 .
9
Select one of the following settings in line '
' ': The time set corresponds to the summer time (summer
time is on)
' ': The time set corresponds to the winter time (summer time
is off)
10
When all settings are correct, confirm with OK .
11
To end, press SYSTEM-MENU .
If the setting has been confirmed with OK the automatic system is disabled.
' using B or A and confirm with C .
' using B or A and confirm with C .
' with B or A .
' using the number buttons 0..9 on
', ' ', ' ', and ' ' in the same way.
':
Installing your DVD recorder