Advertisement
Available languages
Available languages
In a few easy steps you'll be on your way to enjoying something delicious!
For complete instructions and videos, go online to kitchenaid.com/quickstart.
1.
Check to be sure that the Stand Mixer
is unplugged and the speed control is
turned to "0".
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction.
3.
Attach the bowl: Place the bowl on the
bowl clamping plate and gently turn it in
a clockwise direction to lock it into place.
5.
Lower the motor head: Slide the
locking lever to the unlock position
and guide the motor head down. Make
sure motor head is completely down,
then slide the locking lever to the lock
position. Before mixing, test lock by
attempting to raise motor head.
W10882391A KSM3311, KSM3316
04/16
GET STARTED
QUICK START GUIDE
®/™ © 2016 KitchenAid. All rights reserved. KITCHENAID and the design of the
Stand Mixer are trademarks in the U.S. and elsewhere. Used under license in Canada.
2.
Raise the motor head: Slide the locking
lever to the unlock position and lift the
motor head. Once lifted, ensure the
locking lever is in the lock position to
keep the motor head up.
4.
Attach any accessory: Slip the accessory
onto the beater shaft and press upward
as far as possible. Turn the accessory
counterclockwise to hook the accessory
over the pin on the shaft.
ACCESSORY
FLAT BEATER*
FLEX EDGE BEATER*
WIRE WHIP
DOUGH HOOK
*Select models only and accessories sold separately
USE TO MIX
Cookie dough,
cake batter,
guacamole,
pulled meats
Whipped cream,
egg whites,
meringue
Bread dough
Advertisement
