Connecting The Cables - HP S240n User Manual

Connecting the cables

NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a video cable.
NOTE:
be selected by pressing the
button and selecting Input Control.
Connect one end of an HDMI cable to the HDMI port on the back of the monitor and the other end to
●
the source device.
Connect one end of a DisplayPort cable to the DisplayPort on the rear of the monitor and the other
●
end to the DisplayPort on the source device.
The monitor will automatically determine which inputs have valid video signals. The inputs can
– (Minus) button on the rear panel or through the OSD by pressing the Menu
Setting up the monitor 7