Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HP S1922
Summary of Contents for HP S1922
- Page 1 S1922/S1922a and S2022a LCD Monitor User Guide...
- Page 3 Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
-
Page 4: About This Guide
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. -
Page 5: Table Of Contents
HP LCD Monitors ........ - Page 6 Getting Support from hp.com ........
-
Page 7: Product Features
1. Product Features HP LCD Monitors The HP LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) screen with the following features: • Large diagonal display • Maximum graphics resolution: S1922: 1366 x 768 @ 60Hz S1922a: 1366 x768 @ 60Hz... -
Page 8: Safety And Maintenance Guidelines
Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor. WARNING: LCD monitors that are inappropriately situated on dressers, book cases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury. -
Page 9: Maintenance Guidelines
If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. • Use only a power source and connection appropriate for this monitor, as indicated on the label/back plate of the monitor. -
Page 10: Setting Up The Monitor
3. Setting Up the Monitor Unpacking the Monitor 1. Unpack the monitor. Make sure all contents are included. Store the packing box. 2. Turn off the computer and other attached devices. 3. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation. - Page 11 3. Press the base into the column until it locks in position. Figure 3-2 Attaching the Base 4. Lift the monitor to an upright position and place on a flat, stable surface. Figure 3-3 Monitor in upright position Preparing the monitor for wall-mounting 1.
- Page 12 5. Slide the base away from the bottom of the monitor. Figure 3-5 Sliding the base away from the monitor 6. Remove the screws on the back of monitor. Figure 3-6 Removing the screws from the back of the monitor 7.
-
Page 13: Connecting Monitor Cables
Connecting Monitor Cables Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To use DVI, you must have a DVI-compliant graphic card. Connectors are located on the back of the monitor. -
Page 14: High-Bandwidth Digital Content Protection (Hdcp)
High-Bandwidth Digital Content Protection (HDCP) (Available on Select Models) Your monitor supports HDCP and can receive high-definition content. High-definition content is available in many sources, such as Blue-ray Disc devices or HDTV air or cable broadcasts. If you do not have an HDCP-enabled monitor, you will see a blank screen or a lower resolution picture when playing high-definition protected content. -
Page 15: Adjusting The Tilt
Adjusting the Tilt For optimal viewing, adjust the screen tilt to your own preference, as follows: 1. Face the front of the monitor and hold the base so that you do not topple the monitor while changing the tilt. 2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without touching the screen. -
Page 16: Operating The Monitor
Software Readme" file on the CD for instructions (in English only). Downloading updated drivers from the Internet To download the latest version of drivers and software files from the HP Support site: 1. Refer to: http://www.hp.com/support . 2. Select your country/region. -
Page 17: Front-Panel Controls
Front-Panel Controls The monitor buttons are located on the bottom of the front panel Figure 4-1 Front-panel control buttons Icon Power Menu Auto Appendix 4. Operating the Monitor Description Turns the monitor on or puts it in standby or sleep mode. The Power button is located on the bottom or front of the monitor depending on the model. -
Page 18: Using The On-Screen Display (Osd)
Using the On-Screen Display (OSD) Main Main 1st Sub Menu Item Menu Icon Menu Item Luminance Contrast Brightness Eco Mode ENWW 2nd Sub Menu Item Description Contrast from Digital-register. Each step will increase/ decrease value by 1 Backlight Adjustment Each step will increase/ decrease value by 1 Picture Adjustment, Brightness = 90,... - Page 19 Main Main 1st Sub Menu Item Menu Icon Menu Item Image Clock Setup Phase H. Position V. Position Image Ratio Appendix 4. Operating the Monitor 2nd Sub Menu Item Description Adjust picture Clock to reduce Vertical-Line noise. Each step will increase/ decrease value by 1 Adjust Picture Phase to reduce Horizontal-Line noise.
- Page 20 Main Main Menu Item Menu Icon Color Temp. ENWW Menu Item Description Warm Recall Warm Color Temperature. Normal Recall Normal Color Temperature. Cool Recall Cool Color Temperature. sRGB Recall sRGB Color (for select Temperature. models with sRGB function) Red Gain from Digital- register.
- Page 21 Main Main Menu Item Menu Icon OSD Setup Appendix 4. Operating the Monitor Menu Item Description H. Position Adjust the horizontal position of the OSD. Each step will increase/ decrease value by 5 V. Position Adjust the vertical position of the OSD.
- Page 22 Main Main Menu Item Menu Icon Extra ENWW Menu Item Description Input Select Select video input signal. (Available on Select Models) DDC/CI Select DDC/CI on or off Reset Clear each old status of Auto- configuration and set the color temperature to Warm. Do not execute reset, return to main menu.
-
Page 23: Selecting Video Input Connectors
Selecting Video Input Connectors The input connectors are: • VGA connector (analog) • DVI-D connector (digital) (Select Models) The monitor automatically determines which inputs have valid video signals, and displays the image. You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, the default input selection is DVI.The source of input can be switched using the Input Select option in the OSD menu. -
Page 24: Power-Saver Feature
Power-Saver Feature When the monitor is in normal operating mode, the Power light is blue and the monitor uses the normal watts of power. For power usage, refer to "Technical Specification" (Appendix B). The monitor also supports a power-saver mode that is controlled by the computer. -
Page 25: Troubleshooting
Check with your computer manufacturer. Also check the monitor's video cable and make sure none of the pins are bent. • Make sure the HP Monitor Drivers are installed (HP Monitor Drivers are available at : http://www.hp.com/support) • Adjust the Contrast and Brightness Controls. -
Page 26: Getting Support From Hp.com
Getting Support from hp.com Before you contact customer service, refer to HP Technical Support at: http://www.hp.com/support Select your country/region, and then follow the links to the support page for your monitor. Preparing to Call Technical Support If you cannot solve a problem by using the troubleshooting tips in this section, you might have to call technical support. -
Page 27: Technical Specifications
B. Technical Specifications All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. HP LCD Monitors Face treatment: Glare polarizer with hard coating Input terminal: VGA connector DVI-D 24-pin D-type connector (select models) - Page 28 Table B-2 Model S1922a Specifications: Display Type: Viewable Image Size Tilt Maximum Weight (unpacked) Dimensions (h x w x d) Maximum Graphics Resolution Optimum Graphics Resolution Text Mode Dot Pitch Horizontal Frequency (analog mode) Vertical Frequency (analog mode) Environmental Requirements Temperature (independent of altitude) Operating Temperature Non-Operating Temperature...
- Page 29 Table B-3 Model S2022a Specifications: Display Type: Viewable Image Size Tilt Maximum Weight (unpacked) Dimensions (h x w x d) Maximum Graphics Resolution Optimum Graphics Resolution Text Mode Dot Pitch Horizontal Frequency (analog mode) Vertical Frequency (analog mode) Environmental Requirements Temperature (independent of altitude) Operating Temperature Non-Operating Temperature...
-
Page 30: Preset Video Modes
Preset Video Modes The monitor automatically recognizes many preset video input modes that will appear properly sized and centered on the screen. Table B-4 Factory Preset Video Input Modes, S1922/S1922a Item Preset Resolution 640 x 480 720 x 400 800 x 600... -
Page 31: Lcd Monitor Quality And Pixel Policy
For more information about your LCD Monitor, refer to the HP Web site at: http://www.hp.com/support . ENWW... -
Page 32: Agency Regulatory Notices
C. Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 33: Declaration Of Conformity For Products Marked With The Fcc Logo (United States Only)
Canada. German Ergonomics Notice HP products which bear the "GS" approval mark, when forming part of a system comprising HP brand computers, keyboards and monitors that bear the "GS" approval mark, meet the applicable ergonomic requirements. The installation guides included with the products provide configuration information. -
Page 34: Japanese Notice
AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact an authorized HP service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. -
Page 35: Japanese Power Cord Requirements
Product Environmental Notices Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA) http://www.eiae.org . -
Page 36: Restriction Of Hazardous Substances (Rohs)
A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950 ENWW... -
Page 37: Turkey Eee Regulation
Turkey EEE Regulation In Conformity with the EEE Regulation EEE Yönetmeliğine Uygundur ENWW...