Connection Diagram - Pioneer GM-A5702 Owner's Manual

(Connecting the units
Connection diagram
CD
Special red battery wire
RD-223 (sold separately)
)
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amp I ifier to the positive® battery term-
inal.
W
Ground wire (Black)
RD-223 (sold separately)
Connect to metal body or chassis.
®
Car stereo with RCA output jacks (sold sepa-
rately)
@)
External output
®
Connecting wire with RCA pin plugs (sold se-
parately)
®
Speaker input terminal (use a connector in-
cluded)
Please see the following section for speaker
connection instructions. Refer to
Connections
when using the speaker input wire.
(J)
RCA input jack
®
System remote control wire (sold separately)
En
Connect male terminal of this wire to the sys-
tem remote control terminal of the car stereo.
The female terminal can be connected to the
auto-antenna relay control terminal. If the car
stereo lacks a system remote control terminal,
connect the male terminal to the power term-
inal via the ignition switch.
®
Speaker output terminals
Please see the following section for speaker
connection instructions. Refer to
Connecting
the speakers.
@
Fuse 30 Ax 2 (GM-A5702)
I
25 Ax 1 (GM-
A3702)
@ Fuse (30 A) x 2
@Grommet
@
Rear side
@
Front
side~