Table of Contents
Advertisement
High Beams
E167827
Push the lever away from you to switch the
high beam on.
Push the lever away from you again or pull
the lever toward you to switch the high beam
off.
Navigator (TB5) Canada/United States of America, enUSA, Edition date: 201712, Second Printing
Lighting
Headlamp Flasher
E163268
Slightly pull the lever toward you and release
it to flash the headlamps.
AUTOLAMPS
WARNING
The autolamps switch position may not
activate the headlamps in all low
visibility conditions, such as daytime fog.
Always ensure that your headlamps are
switched to auto or on, as appropriate, during
all low visibility conditions. Failure to do so
may result in a crash.
83
Note: If you switch on autolamps, you can
switch on the high beams after the
headlamps turn on.
Note: You may have to manually switch the
headlamps on in severe weather conditions.
A
E173258
When the lighting control is in the autolamps
position, the headlamps automatically turn
on in low light situations or when the wipers
turn on.
If you switch on autolamps, the following also
turn on:
•
Configurable daytime running lamps.
•
Automatic high beam control.
•
Adaptive headlamp control.
Advertisement
Table of Contents
Troubleshooting
