Disassembly - Pioneer KEH-M8117ZT/X1B/EW Service Manual

KEH-M1006ZT

7.1.2 DISASSEMBLY

- Removing the Cassette Mechanism Module(not shown)
1. Remove the four screws.
2. Remove the connector and then remove the Cassette Mechanism Module.
- Removing the Grille Assy(not shown)
1. Disengage the stopper at four locations and then remove the Grille Assy.
- Removing the Heat Sink(Fig.1)
Remove the three screws.
Remove the two screws and then Heat Sink.
- Removing the Tuner Amp Assy (Fig.2)
Remove the screw.
Unbend the tabs at two locations
indicated by arrow until straight.
Remove the Tuner Amp Assy.
38
Heat Sink
Tuner Amp Assy
Fig.1
Fig.2