LG GS290 Service Manual page 70

GS290 Operational Description
START
Check camera connector,
24pin main PCB connector
combination then Camera test
with equipped camera module
Replace New Camera
module
Working properly?
Replace Camera module
Assemble
Change CAM connector
So, follow Next sequences
1. Remove fault CAM connector
with heat gun.
2. Clear PAD
3. Change CAM connector
Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LG Electronics
Yes
No
Yes
Yes
72/136
4. TROUBLE SHOOTING
Replace
Main PCB
CAM connector
- 71 -
Revision B
LGE Internal Use Only
LGE Property