Play From An External Device - Philips DS3150/12 User Manual

Charge the iPod/iPhone
Note
•
If the docking speaker is operated on the batteries, you
cannot charge your iPod/iPhone.
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Tip
•
For certain iPod models, it may take up to a minute
before the charging indication appears.
Sync iPod/iPhone with PC
Note
•
Make sure that iTunes has been configured properly in
your PC.
1
Insert the iPod/iPhone in the dock.
2
Press to switch the docking speaker to
standby mode.
» The LED indicators light off.
3
Connect your docking speaker and PC
with a USB cable.
4
Launch iTunes to synchronize your docking
speaker with PC.
» The docked iPod/iPhone is
synchronized with PC successfully
through the iTunes.
Note
•
Due to different materials and product techniques,
some USB cables may not work with this device.
EN
11

Play from an external device

With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
•
Make sure that no iPod/iPhone is docked in the speaker.
1
If no iPod/iPhone is docked, connect an
MP3 link cable (3.5mm, not supplied) to:
• the MP3-LINK socket at the back of
the docking speaker.
• the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
2
Play music on the device (see the device's
user manual).
Tip
•
You can select MP3 link source by pressing
remote control.
on the