Listen to radio
1
Press RADIO .
2
Use the remote control to control the
radio.
Button
Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
•
The preset number for
other radio stations remain
unchanged.
Tip
•
Press
AUDIO SYNC to toggle between FM
stereo and FM mono mode.
Note
•
If the FM radio station transmits RDS (Radio
Data System) data, the name of the radio
station is displayed.
Reinstall all the radio stations
1
Press RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
»
All previously stored radio stations are
replaced.
Note
•
Check the radio antenna connection if no
stereo signal is detected or less than 5 stations
are detected during radio installation.
30
EN
Search and store radio stations
individually
1
Press RADIO .
2
Press
/
.
»
It starts searching until a radio station
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
•
To À netune the radio frequency,
press
/ .
4
Press PROGRAM .
»
The preset station number blinks.
»
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5
Press
/
(or the Numeric buttons ) to
select a preset number to store.
6
Press PROGRAM to conÀ rm.