Table of Contents
Advertisement
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
•
Option 1: Connect to the HDMI jack (for
a HDMI, DVI or HDCP-compliant TV).
•
Option 2: Connect to the SCART jack
(for a standard TV).
•
Option 3: Connect to the component
video jacks (for a standard TV or
Progressive Scan TV).
Note
•
You must connect this Home Theater System
directly to a TV.
Before you connect
1
Push up the catch and remove the rear
cover.
2
Connect the cables to the corresponding
jacks and direct the cables to the open
hole on top.
•
See the connection options in the
following pages.
3
Once complete, close the rear cover.
Note
•
All the cables must be placed inside the rear
panel in order to close the rear cover properly.
Option 1: Connect to the HDMI jack
1
Connect an HDMI cable (not supplied)
to the HDMI OUT jack on this Home
Theater System and the HDMI input jack
on the TV.
Note
•
If your device supports HDMI CEC, you can
control compliant devices with a single remote
control. (see 'Get started' > 'Use Philips
EasyLink').
Tip
•
If the TV has a DVI connection only, connect
via a HDMI/DVI adaptor. Connect an audio
cable for sound output.
•
You can optimize the video output. (see
'Adjust settings' > 'Video setup' > [HDMI
Setup] ).
•
This type of connection provides the best
picture quality.
EN
9
Advertisement
Table of Contents
