LG 29UT55V Owner's Manual page 48

CUSTOMIZING SETTINGS
48
To specify Factory Reset
SETTINGS> OPTION> Factory Reset
All stored information is deleted and TV settings are reset.
TV turns itself off and back on, and all settings are reset.
When Lock System is in place, a pop-up window appears and asks for password.
Do not turn off the power during initialization.
To change TV mode
SETTINGS> OPTION> Mode Setting
Selects Standard or Store Demo.
When in use in home, please select Standard.
Store Demo mode is for store display.
SETTINGS> OPTION> Customer Support> Software Update
Uses Software Update to check and obtain the latest version. If not updated, certain functions may not
work properly.
Software Update
Set it to On. If an update is available, a prompt will appear to perform the update.
Automatic update [This feature is available on certain models only] If an update is available, the
mode update automatically starts without prompting.
Check Update [This feature is available on certain models only] Checks the latest update
Version version installed. When a new update is available, the download process can be
performed manually.
When the update starts, the update progress window appears for a short time and disappears.
y
The latest version can be obtained via the digital broadcast signal or an internet connection.
y
[Depending on model]
Changing the programme while downloading the software via a digital broadcast signal interrupts the
y
download process. Returning to the initial programme allows downloading to resume.
If software is not updated, certain functions may not work properly.
y
[For Finland/Sweden/Denmark/Norway models.]
y
If the software update is performed via the broadcasting signal, you will be prompted to continue the
update regardless of whether the Automatic update mode is enabled or not.
[This feature is available in certain countries only.] It is also possible to check manually for available
y
updates.
SETTINGS> OPTION> Customer Support> Picture Test
[This feature is available on certain models only.]
Run an Picture Test first to verify that the image signal output is normal.
If there is no problem with the test image, check connected external devices and the broadcast signal.
SETTINGS> OPTION> Customer Support> Sound Test
[This feature is available on certain models only.]
Run a Sound Test first to verify that the sound signal output is normal.
If there is no problem with the test sound, check connected external devices and the broadcast signal.
Data Service
SETTINGS> OPTION> Data Service
[Depending on country]
This function allows users to choose between MHEG (Digital Teletext) and Teletext if both exist at the
same time.
If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.