Using The Kensington Security System - LG 29UT55V Owner's Manual

ASSEMBLING AND PREPARING
16
CAUTION
Disconnect the power first, and then
y
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
y
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
y
may cause damage to the TV and void
your warranty.
Use the screws and wall mounts that
y
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the warranty.
Screw length from outer surface of back
y
cover should be under 8mm.
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
NOTE
Use the screws that are listed on the
y
VESA standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You
y
can obtain additional accessories from
your local dealer.
The length of screws may differ
y
depending on the wall mount. Be sure to
use the proper length.
For more information, refer to the
y
instructions supplied with the wall mount.
Back Cover
Max.8mm

Using the Kensington security system

The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit http://www.kensington.com .
Connect the Kensington security system cable
between the TV and a table.
NOTE
The Kensington security system is optional.
y
You can obtain additional accessories from
most electronics stores.