Enjoying Movies; Changing The Angles; Displaying The Subtitles; Adjusting The Playback Picture (Custom Picture Mode) - Sony DVP-NS775V Service Manual

◆NORMAL SURROUND ◆VIRTUAL MULTI REAR
Software with 2 channel audio signals is Creates an array of virtual rear speakers from
decoded with the Dolby Surround (Pro Logic) a single set of actual rear speakers.
decoder to create surround effects. The rear The position of the virtual rear speakers
speakers will emit identical monaural sounds. differs according to "REAR" or "SIDE"
If you are using a center speaker, the setting of the rear speakers (page 82).
appropriate sounds for the center speaker will
be delivered.
L R
LS RS
◆ENHANCED SURROUND
Provides a greater sense of presence from a
Dolby Surround (Pro Logic) source with a
monaural rear channel signal. Produces a
stereo like effect in the rear channels.
◆VIRTUAL REAR SHIFT
Shifts the sound of the rear speakers away
◆VIRTUAL MULTI DIMENSION
from the actual speaker position.
Creates an array of virtual rear speaker
The shift position differs according to
positions higher than the listener from a
"REAR" or "SIDE" setting of the rear
single set of actual rear speakers.
speakers (page 82).
This mode creates five sets of virtual speakers
REAR
surrounding the listener at approximately a
L R
30 angle of elevation. The effect differs
according to "REAR" or "SIDE" setting of
the rear speakers (page 82).
LS RS
SIDE
L R
LS RS

Displaying the Subtitles

Enjoying Movies

Changing the Angles

If subtitles are recorded on the discs, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
If various angles (multi-angles) for a scene
are recorded on the DVD VIDEO, " "
appears in the front panel display. This means
that you can change the viewing angle.
ANGLE
1
1
Press ANGLE during playback.
The number of the angle appears on the 2
display.
2
2
Press ANGLE repeatedly to select
an angle number.
The scene changes to the selected angle.
Note
Depending on the DVD VIDEO, you may not be To turn off the subtitles
able to change the angles even if multi-angles are
Select "OFF" in step 2.
recorded on the DVD VIDEO.
Depending on the DVD VIDEO, you may not be
able to change the subtitles even if multilingual
subtitles are recorded on it. You also may not be
able to turn them off.
REAR
L R
LS RS
SIDE
L R
LS RS
REAR
L R
LS RS
SIDE
L R
LS RS
, 55
SUBTITLE
Press SUBTITLE during playback.
The following display appears.
1:ENGLISH
Press SUBTITLE repeatedly to
select a setting.
◆ When playing a DVD VIDEO
Select the language.
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. See "Language
Code List" on page 92 to see which
language the code represents.
◆ When playing a DVD-RW
Select "ON."
Note
57
L: Front speaker (left)
R: Front speaker (right)
LS: Rear speaker (left)
RS: Rear speaker (right)
: Virtual speaker
Notes
• When you select one of the surround modes, turn
off the surround setting of the connected TV or
amplifier (receiver).
• Not all discs will respond to the "TVS NIGHT"
function in the same way.
• To enjoy the multichannel audio through the
5.1CH OUTPUT jacks, correctly set each speaker
position and distance (page 28, 82).
• When the playing signal does not contain a signal
for the rear speakers, you cannot hear the TVS
effect.
• When you select one of the TVS modes, the
player does not output the sound of center
speaker.
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
• If you use the DIGITAL OUT (OPTICAL or
COAXIAL) jack and set "DOLBY DIGITAL" to
"DOLBY DIGITAL," and "DTS" to "DTS," in
"AUDIO SETUP," sound will come from your
speakers but it will not have the SURROUND
effect.
56
Adjusting the Playback
Picture
(CUSTOM PICTURE MODE)
You can adjust the video signal of the DVD,
VIDEO CD or DATA CD in JPEG format
from the player to obtain the picture quality
you want. Choose the setting that best suits
the program you are watching. When you
select "MEMORY," you can make further
adjustments to each element of the picture
(color, brightness, etc.).
C/X/x/c
DISPLAY
1
Press PICTURE MODE during
playback.
The following display appears.
DYNAMIC 1
2
Press PICTURE MODE repeatedly
to select the setting you want.
The default setting is underlined.
• STANDARD: displays a standard
picture.
58
1-13
DVP-NS775V/NS780V
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the color intensity.
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and color intensity.
• CINEMA 1: enhances details in dark
areas by increasing the black level.
• CINEMA 2: white colors become
brighter and black colors become
richer, and the color contrast is
increased.
• MEMORY: adjusts the picture in
greater detail.
z Hint
When you watch a movie, "CINEMA 1" or
"CINEMA 2" is recommended.
Adjusting the picture items in
PICTURE
MODE
"MEMORY"
You can adjust each element of the picture
individually.
• PICTURE: changes the contrast
• BRIGHTNESS: changes the overall
brightness
ENTER
• COLOR: makes the colors deeper or lighter
O RETURN
• HUE: changes the color balance
1
Press PICTURE MODE repeatedly to
select "MEMORY" and press ENTER.
The "PICTURE" adjustment bar appears.
( )
C 0 1 : 3 2 : 5 5
PICTURE
Select : ENTER Cancel : RETURN
2
Press C/c to adjust the picture
contrast.
To go the next or previous picture item
without saving the current setting, press
X/x.
3
Press ENTER.
The adjustment is saved, and
"BRIGHTNESS" adjustment bar
appears.
0