6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
7. Press the Menu button.
8. Select Installation II → Advanced → Network → Network State → Connect
9. After getting into Network, input the following:
DHCP: Off
IP Address: 10. 10. 10. 10
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
DNS Server: 0.0.0.0
(Enter) / ► to confirm settings.
10. Press
11. Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
12. In the Address bar, input the IP address: 10. 10. 10. 10.
(Enter) / ►.
13. Press
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
Based on network web-page for the input-string in tools tab, the limitation for Input-Length
is in the below list ("space" and the other punctuation key included):
– 43 –