1. Stereo indicator 2. FM band indication 3. MW band indication 4. SW band indication 5. MW frequency unit indication 6. FM and SW frequency unit indication 7. Alarm ON indication 8. Store address indication 9. Store station indication 10. Sleep OFF indication 11.
When you listen to the radio, please turn the knob to adjust it to your desired volume. Band Selection In receiving state, press the Band / mode button to choose FM, MW, SW programs. Manual Search · Press the Power Switch/Sleep off button to turn on the radio. ·...
Page 5
Store scan In receiving state press the Alarm button/store scan button once, it will begin to scan station, in the course of searching, when there is a station, it will store it automatically, and then hold on. In the course of automatic scanning press the Alarm button/store scan button once again, it will discontinue scan. Attention: 1.In the course of automatic scanning, if the reception is not clear please change to use manual mode to search station.
Using Reset Button: Press the reset button once, the radio will restore to normal work. Attention: After each press on the reset button, the information pre-stored in the radio will be cleared, you need store information and adjust time again. Time setting The 24-hour time system is used for the radio.
Antenna · For FM or SW reception, use the telescopic antenna. Pull out the antenna and keep it vertical to get the best reception. · The MW antenna is magnetic bar within the system. Rotate the unit to get the best reception. Maintenance and care ·...