Disassembly - Samsung SM-J710FN Service Manual

7. Level 2 Repair

7-3. Disassembly

1 1) Unscrew 18 points
※ Caution
1) Be care of scratch.
3~4
※This sequence just do when need to OCTA disassemble
1) After heating for 20 minutes the device at 75℃,take out the device from Mobile dryer
2) Detach the Bracket Cu tape carefully from the OCTA Cu sheet using Glass absorber and holder.
3) Be careful not to separate LCD from TSP.
※ Caution
1) Be care of scratch and molding damage.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
2
※ Caution
www.AppleUnlockStore.com
1) Remove Rear from Set
2) Remove PBA front Front Assy
1) Be care of scratch.