Table of Contents
Advertisement
Operations for video
playback (DVD/VCD/SVCD)
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
in the disc.
To select a playback feature or item
Use
keys or alphanumeric
keypad (0-9) on the remote, then press
OK to start playback.
To access or remove the menu
Press DISC MENU on the remote.
Zooming in
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
A
During playback, press ZOOM
repeatedly to display the picture with
different scales.
Use
the enlarged picture.
Playback will continue.
B
Press ZOOM repeatedly to return to
the original size.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
01-49 dvp7400_93_eng2.indd 25
01-49 dvp7400_93_eng2.indd 25
Playback Features
keys to pan through
Resuming playback from the last
stopped point
Resume playback of the last 10 discs is
possible, even if the disc was ejected or
the power switched off.
Load one of the last 10 discs.
'LOADING' appears.
During loading mode press PLAY
the disc will be played back from the last
point.
To cancel resume mode
In stop mode, press STOP Ç again.
Slow Motion
A
Press
during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(forward or backward).
Sound will be muted.
B
To return to normal speed, press
PLAY
.
Tip:
– Slow motion backward is not applicable in
VCDs.
Forward / Reverse Searching
You can fast forward or fast reverse a
disc during playback and select a desired
search speed.
A
Press and hold ./ > to enter
reverse / forward searching mode.
B
Press ./ > during playback to
select the required speed: 2X, 4X, 8X,
16X or 32X (backward or forward).
Sound will be muted (DVD/VCD) or
intermittent (CD).
C
To return to normal speed, press
PLAY
.
(continued)
and
25
2006-10-12 2:17:11 PM
2006-10-12 2:17:11 PM
Advertisement
Table of Contents
Troubleshooting
