Selecting The Colour System That Corresponds To Your Tv - Philips DVP632 User Manual

To deactivate Progressive manually
- cont'd
If the progressive function is activated, but
your TV does not support progressive
function or YPbPr cable is not connected
accordingly, there will be a blank screen.
You can deactivated progressive function
as below:
1
Press STANDBY ON on the front panel
to switch on the DVD player.
2
Press OPEN/CLOSE on the front panel
to open the disc tray.
3
Press numerical key pad '1'.
The blue Philips DVD background
appears on the TV screen.
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
- - VIDEO SETUP PAGE - -
TV STANDARD
TV DISPLAY
CLOSED CAPTIONS
VIDEO OUTPUT
PROGRESSIVE
SMART PICTURE
MAIN PAGE
1
Press SYSTEM MENU.
2
Press 4 3 to select 'Video Setup Page'.
3
Enter its submenu by pressing OK.
4
Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu.
Move to 'TV Standard' and press B.
14
01-36 DVP630_EU_051
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
Helpful Hints:
–
Standard setting, ensure that your TV
supports the 'selected TV Standard'
system.
–
your TV, wait for 15 seconds for auto
recovery.
MULTI
NTSC
PAL
To exit from the menu
Press SYSTEM MENU.
14
Getting Started
Before changing the current TV
If there is no proper picture on
- - REFER TO THE OWNER'S MANUAL - -
Changing MULTI to PAL
1. Ensure your TV supports PAL
2. If there is a blank screen on normal TV
wait 15 seconds for auto recover
OK
CANCEL
1 2 - Move OK - Select
- - REFER TO THE OWNER'S MANUAL - -
Confirm again to use PAL
If picture is good, press OK button on remote control
OK CANCEL
TO GO BACK TO MULTI
1. Open tray,
2. Press '3' Key
.
1 2 - Move OK - Select
/05_8239 210 98393
18/03/2004, 10:04 AM