A Word About Your Keys; Keyless Push Button Ignition; Things To Know Before Starting Your Vehicle 9 - Chrysler 200 2017 Owner's Manual

A WORD ABOUT YOUR KEYS

Your vehicle uses a keyless ignition system. This system
consists of a Remote Keyless Entry (RKE) key fob and a

Keyless Push Button Ignition.

Keyless Enter-N-Go — Passive Entry Feature
This vehicle is equipped with the Keyless Enter-N-Go —
Passive Entry feature, (refer to Keyless Enter-N-Go —
Passive Entry in Things To Know Before Starting Your
Vehicle for further information).
Keyless Push Button Ignition
This feature allows the driver to operate the ignition with
the push of a button as long as the key fob is in the
passenger compartment.
The Keyless Push Button Ignition has four operating
positions, three of which are labeled and will illuminate
when in position. The three positions are OFF, ACC, and
ON/RUN. The fourth position is START. During start,
ON/RUN will illuminate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11
NOTE: In case the ignition does not change with the push
of a button, the key fob may have a low or dead battery. In
this situation, a back up method can be used to operate the
ignition switch. Put the nose side (side opposite of the
emergency key) of the key fob against the engine START/
STOP button and push to operate the ignition.
Keyless Push Button Ignition
1 — OFF
2 — ACC (ACCESSORY)
3 — ON/RUN
2